Thermal housing Relion-T-N-Exd and Relion-T-P-N for thermal imaging cameras
ГДЕ КУПИТЬ
Thermal housing for video surveillance camera Relion-T-P-N/T-N Exd
USEFUL INTERNAL VOLUME
|
Our thermal housings are made from high-tech optical components made of the highest quality monocrystalline germanium with anti-reflective coatings for a wide range of wavelengths, including diamond-like (DLC) coatings for special and extreme operating conditions. All optical elements undergo strict quality control using spectroscopic and interferometric measurements. |
|
|
hermal housing is designed to protect thermal imaging cameras (thermal imagers) from environmental influences. It is used in security and technological video surveillance systems. |
|
|
Explosion protection marking РВ Ex db I Mb / 1Ex db IIC T6 Gb / Ex tb IIIC T85°С Db allows the use of Relion-T-N thermal housing in explosive zones of classes "1" and "2", as well as in underground workings of mines, mines and their ground structures. |
|
|
Explosion-proof thermal housing Relion-T-N is supplied in the following versions:
All versions have a cold start, protection against overheating, polarity reversal and short circuit. |
|
|
General industrial thermal housing Relion-T-P-N is supplied in the following versions:
All versions have a cold start, protection against overheating, polarity reversal and short circuit. |
|
|
The housing is made of stainless steel. |
|
|
The stainless steel housing protects the built-in equipment from exposure to sea water, salt spray, alkaline, acid and other chemically aggressive environments. |
|
|
A special germanium glass is installed in the viewing window of the thermal housing, which does not interfere with the IR radiation of the object of observation. |
|
|
Complete dust and water tight housing - IP66/IP68 |
|
|
Housing power supply according to PoE technology according to IEEE 802.3at standard - version 11 |
|
|
Injector parameters for PoE:
|
|
|
The performance of the video camera powered by PoE meets the modern requirements of the video surveillance system::
PoE standard for consuming equipment up to 12.7V
PoE standard for consuming equipment up to 25.4V
PoE standard for consuming equipment up to 54V, when connected via 4 UTP pairs. |
|
|
When choosing a switch for a thermal enclosure, there are two parameters to consider when using PoE technology: the maximum power that the switch can provide per port and the overall PoE power budget of the switch. The maximum power consumption of the video camera must not exceed the allocated power per switch port, and the total maximum power consumption of the video cameras must not exceed the total PoE power budget of the switch. |
|
|
Automatic mode of maintaining the temperature of the inner space of the thermal jacket. |
|
|
Automatic heating of the inner space of the thermal housing before a cold start, which ensures a safe operation of the thermal imager. |
|
|
Stabilized supply voltage for the thermal imager. |
|
|
Emergency power off of the thermal imager at a temperature in the thermal casing above +55°С. |
|
|
New option - thread parameters for cable glands according to European standards. |
|
| The degree of protection by the shell according to GOST 14254 |
|
| Type of explosion protection |
 Exd
|
|
Warranty period of operation - 18 months from the date of commissioning, but not more than 24 months from the date of release by the manufacturer. |
|
|
The mounting bracket is included in the basic package. Use of a mounting bracket makes it easier to aim the thermal jacket. |
|
|
Optionally (by additional order) a sun visor is supplied with a thermal jacket. |
|
|
For ease of design, a specialized program Spectron-OPS-AutoCAD is used. |
|
|
Thermal casings "Relion" are included in the nomenclature reference book of materials and equipment of JSC "Gazprom". |
|
Similar products
